Pure Water Power 4-Stage RODI Water Purification Cart System

Description

This New Edition now is equipped with a 20-Inch DI Filter for longer life between filter changes. The Pure Water Power 4-stage Cart allows for spot free rinse using only regular tap pressure up to 50 ft. high. This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible. The 4 stages of filtration are as follows: Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon Filter which removes the Chlorine prior to stage-3; which is the Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS). before passing through the final Stage-4 De Ionization (DI) filter which brings the TDS level down to 0.
This gives you 100% pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change. This Pure Water Power RODI System produces almost .75 gpm minute at heights up to 50 ft with normal incoming pressure of 50 psi from the water source.
This System produces 40 gallons per hour and is capable of operating (1) Water fed pole with a 4 jet brush up to 50 ft. high assuming your incoming pressure is at least 45 psi. If you are in low pressure areas, a booster pump may be necessary to get proper water flow.
Pure Water Power has delivered a tap water RODI system carefully configured with the most efficient water flow available using only tap pressure and has constructed this unit with all brass fittings, (no plastic parts found on this commercial work horse), and stainless steel RO housing for a professional look and commercial grade quality and ruggedness. If you demand perfection at a better than market price, well this unit is what you want. Capable of producing 2500 GPD at 125 incoming psi. Easily connect to any water source and any waterfed pole. Equipped with standard garden hose fittings in and out. It is more than recommended to use a 5/8" I.D. minimum hose diameter incoming water supply. Anything smaller will restrict the water flow of this system.
Available in 3 configurations and upgradable to the dual RO version at any time.
Single RO Version,
Dual RO Version,
20" DI Version,
10" DI Version.
This Pure Water Power RODI System produces almost .75 gallons per minute with a single RO stystem and 1.4 gpm with the dual RO system with normal incoming pressure of 48 psi from the source.
The Single RO version will allow you to operate a single pole up to 50 ft. and the dual RO version will allow you to operate a single pole beyond 50 ft. or operate two poles up to 50 ft. The dual RO produces almost twice the water flow thus allowing you to work in lower than normal incoming pressure locations.
DI Filter Estimated Life Span in Gallons
Supply Water TDS
10" DI Filter Capacity
20" DI Filter Capacity
100
715
14000
150
4767
9,500
200
3575
7,100
250
2860
5,700
300
2400
4,800
350
2050
4,100
400
1800
3,600
450
1550
3,100
500
1200
2,400
The Pure Water Power 4-stage Cart allows for spot free rinse using only regular tap pressure up to 50 ft. high. This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible. The 4 stages of filtration are as follows: Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon filter which removes the Chlorine prior to Stage-3; which is the Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS) before passing through the final Stage-4; De-Ionization (DI) filter which brings the TDS level down to 0. This gives you 100% pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change.
From Discount Cleaning Products